Mail Thread Index

• Date Index

• [openrisc], Mark Barr
• [openrisc] How to use gdb set connamd ?, Zhangyong
• [openrisc] Re: JTAG Proxy, Marko Mlinar
  • RE: [openrisc] Re: JTAG Proxy, Igor Mohor
  • [openrisc] Is the or1ksim not able to the mem_ctrl power-on boot?, Zhangyong
    • Re: [openrisc] Is the or1ksim not able to the mem_ctrl power-on boot?, Simon Srot
  • [openrisc] The documention of or1ksim/gdb is few!, Zhangyong
    • Re: [openrisc] The documention of or1ksim/gdb is few!, Marko Mlinar
  • [openrisc] Can gdb for or1k read/write the address of WISHBONE SOC bus ?, Zhangyong
    • Re: [openrisc] Can gdb for or1k read/write the address of WISHBONE SOC bus ?, Marko Mlinar
      • Re: [openrisc] Can gdb for or1k read/write the address of WISHBONE SOC bus ?, Zhangyong
      • Re: [openrisc] Can gdb for or1k read/write the address of WISHBONE SOC bus ?, Marko Mlinar
• [openrisc] Question on breakpoint method, maunal moren
  • Re: [openrisc] Question on breakpoint method, Damjan Lampret
    • Re: [openrisc] Question on breakpoint method, Marko Mlinar
• [openrisc] Breakpoints + Development interface, Luis Santos
  • RE: [openrisc] Breakpoints + Development interface, Igor Mohor
  • Re: [openrisc] Breakpoints + Development interface, Marko Mlinar
• [openrisc] DSP instruccions fail, JCastillo
  • Re: [openrisc] DSP instruccions fail, Marko Mlinar
• [openrisc] DSP instructions assembler error, javier_castillo_villar
  • Re: [openrisc] DSP instructions assembler error, Damjan Lampret
    • Re: [openrisc] DSP instructions assembler error, Marko Mlinar
      • Re: [openrisc] DSP instructions assembler error, xxxx
      • Re: [openrisc] DSP instructions assembler error, JCastillo
      • Re: [openrisc] DSP instructions assembler error, xxxx
  • Re: [openrisc] DSP instructions assembler error, Marko Mlinar
• [openrisc] Problem about configure the gcc with "--target=or32-uclinux", xu hu
  • Re: [openrisc] Problem about configure the gcc with "--target=or32-uclinux", xu hu
    • Re: [openrisc] Problem about configure the gcc with "--target=or32-uclinux", Ivan Guzvinec
    • Re: [openrisc] Problem about configure the gcc with "--target=or32-uclinux", Ivan Guzvinec
• [openrisc] DSP instructions, javier_castillo_villar
• [openrisc] Help on compilation with or32-uclinux-gcc, maunal moren
  • Re: [openrisc] Help on compilation with or32-uclinux-gcc, Marko Mlinar
• [openrisc] Error compiling binutils, javier_castillo_villar
  • Re: [openrisc] Error compiling binutils, Marko Mlinar
    • Re: [openrisc] Error compiling binutils, Marko Mlinar
  • <Possible follow-up(s)>
  • Re: [openrisc] Error compiling binutils, javier_castillo_villar
    • Re: [openrisc] Error compiling binutils, Marko Mlinar
• [openrisc] Gdb Debuginfo for variables in the data-segment, Andreas Rasmusson
  • Re: [openrisc] Gdb Debuginfo for variables in the data-segment, Gili Gamliel
  • <Possible follow-up(s)>
  • Re: [openrisc] Gdb Debuginfo for variables in the data-segment, Andreas Rasmusson
• [openrisc] Simulator as a debuger, Gili Gamliel
  • Re: [openrisc] Simulator as a debuger, Marko Mlinar
    • Re: [openrisc] Simulator as a debuger, Gili Gamliel
      • Re: [openrisc] Simulator as a debuger, Marko Mlinar
      • Re: [openrisc] Simulator as a debuger, Marko Mlinar
      • [openrisc] How to simulate OpenRisc in ModelSim, Xing Yu
      • Re: [openrisc] How to simulate OpenRisc in ModelSim, Damjan Lampret
• [openrisc] did the uclinux support loading program from JTAG port?, mtsu
  • Re: [openrisc] did the uclinux support loading program from JTAG port?, Marko Mlinar
• [openrisc] 坐以待斃不如把握機會, real
• [openrisc] who can run the uclinux successfully?, mtsu
  • Re: [openrisc] who can run the uclinux successfully?, Simon Srot
  • Re: [openrisc] who can run the uclinux successfully?, Damjan Lampret
• [openrisc] gdb over jtag requirements?, Andreas Rasmusson
  • Re: [openrisc] gdb over jtag requirements?, Simon Srot
• [openrisc] or1200_defines.v bug?, Jeff Hanoch
  • Re: [openrisc] or1200_defines.v bug?, Jeff Hanoch
    • Re: [openrisc] or1200_defines.v bug?, Damjan Lampret
• [openrisc] or32-uclinux, or32-uclibc and or1ksim, maunal moren
  • Re: [openrisc] or32-uclinux, or32-uclibc and or1ksim, Marko Mlinar
    • Re: [openrisc] or32-uclinux, or32-uclibc and or1ksim, maunal moren
      • Re: [openrisc] or32-uclinux, or32-uclibc and or1ksim, Marko Mlinar
      • Re: [openrisc] or32-uclinux, or32-uclibc and or1ksim, Marko Mlinar
      • Re: [openrisc] or32-uclinux, or32-uclibc and or1ksim, maunal moren
      • Re: [openrisc] or32-uclinux, or32-uclibc and or1ksim, Simon Srot
      • Re: [openrisc] or32-uclinux, or32-uclibc and or1ksim, maunal moren
• Re: [openrisc] connecting GDB to remote target, Marko Mlinar
  • <Possible follow-up(s)>
  • Re: [openrisc] connecting GDB to remote target, Marko Mlinar
• Re: [openrisc] Question about or1ksim with gdb, Marko Mlinar