{
   "containers": {
      "cna": {
         "providerMetadata": {
            "orgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038"
         },
         "descriptions": [
            {
               "lang": "en",
               "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncrypto: qcom-rng - ensure buffer for generate is completely filled\n\nThe generate function in struct rng_alg expects that the destination\nbuffer is completely filled if the function returns 0. qcom_rng_read()\ncan run into a situation where the buffer is partially filled with\nrandomness and the remaining part of the buffer is zeroed since\nqcom_rng_generate() doesn't check the return value. This issue can\nbe reproduced by running the following from libkcapi:\n\n    kcapi-rng -b 9000000 > OUTFILE\n\nThe generated OUTFILE will have three huge sections that contain all\nzeros, and this is caused by the code where the test\n'val & PRNG_STATUS_DATA_AVAIL' fails.\n\nLet's fix this issue by ensuring that qcom_rng_read() always returns\nwith a full buffer if the function returns success. Let's also have\nqcom_rng_generate() return the correct value.\n\nHere's some statistics from the ent project\n(https://www.fourmilab.ch/random/) that shows information about the\nquality of the generated numbers:\n\n    $ ent -c qcom-random-before\n    Value Char Occurrences Fraction\n      0           606748   0.067416\n      1            33104   0.003678\n      2            33001   0.003667\n    ...\n    253   �        32883   0.003654\n    254   �        33035   0.003671\n    255   �        33239   0.003693\n\n    Total:       9000000   1.000000\n\n    Entropy = 7.811590 bits per byte.\n\n    Optimum compression would reduce the size\n    of this 9000000 byte file by 2 percent.\n\n    Chi square distribution for 9000000 samples is 9329962.81, and\n    randomly would exceed this value less than 0.01 percent of the\n    times.\n\n    Arithmetic mean value of data bytes is 119.3731 (127.5 = random).\n    Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).\n    Serial correlation coefficient is 0.159130 (totally uncorrelated =\n    0.0).\n\nWithout this patch, the results of the chi-square test is 0.01%, and\nthe numbers are certainly not random according to ent's project page.\nThe results improve with this patch:\n\n    $ ent -c qcom-random-after\n    Value Char Occurrences Fraction\n      0            35432   0.003937\n      1            35127   0.003903\n      2            35424   0.003936\n    ...\n    253   �        35201   0.003911\n    254   �        34835   0.003871\n    255   �        35368   0.003930\n\n    Total:       9000000   1.000000\n\n    Entropy = 7.999979 bits per byte.\n\n    Optimum compression would reduce the size\n    of this 9000000 byte file by 0 percent.\n\n    Chi square distribution for 9000000 samples is 258.77, and randomly\n    would exceed this value 42.24 percent of the times.\n\n    Arithmetic mean value of data bytes is 127.5006 (127.5 = random).\n    Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).\n    Serial correlation coefficient is 0.000468 (totally uncorrelated =\n    0.0).\n\nThis change was tested on a Nexus 5 phone (msm8974 SoC)."
            }
         ],
         "affected": [
            {
               "product": "Linux",
               "vendor": "Linux",
               "defaultStatus": "unaffected",
               "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
               "programFiles": [
                  "drivers/crypto/qcom-rng.c"
               ],
               "versions": [
                  {
                     "version": "ceec5f5b5988",
                     "lessThan": "a8e32bbb96c2",
                     "status": "affected",
                     "versionType": "git"
                  },
                  {
                     "version": "ceec5f5b5988",
                     "lessThan": "184f7bd08ce5",
                     "status": "affected",
                     "versionType": "git"
                  },
                  {
                     "version": "ceec5f5b5988",
                     "lessThan": "0f9b7b8df175",
                     "status": "affected",
                     "versionType": "git"
                  },
                  {
                     "version": "ceec5f5b5988",
                     "lessThan": "ab9337c7cb6f",
                     "status": "affected",
                     "versionType": "git"
                  },
                  {
                     "version": "ceec5f5b5988",
                     "lessThan": "485995cbc98a",
                     "status": "affected",
                     "versionType": "git"
                  },
                  {
                     "version": "ceec5f5b5988",
                     "lessThan": "a680b1832ced",
                     "status": "affected",
                     "versionType": "git"
                  }
               ]
            },
            {
               "product": "Linux",
               "vendor": "Linux",
               "defaultStatus": "affected",
               "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
               "programFiles": [
                  "drivers/crypto/qcom-rng.c"
               ],
               "versions": [
                  {
                     "version": "4.19",
                     "status": "affected"
                  },
                  {
                     "version": "0",
                     "lessThan": "4.19",
                     "status": "unaffected",
                     "versionType": "custom"
                  },
                  {
                     "version": "4.19.236",
                     "lessThanOrEqual": "4.19.*",
                     "status": "unaffected",
                     "versionType": "custom"
                  },
                  {
                     "version": "5.4.187",
                     "lessThanOrEqual": "5.4.*",
                     "status": "unaffected",
                     "versionType": "custom"
                  },
                  {
                     "version": "5.10.108",
                     "lessThanOrEqual": "5.10.*",
                     "status": "unaffected",
                     "versionType": "custom"
                  },
                  {
                     "version": "5.15.31",
                     "lessThanOrEqual": "5.15.*",
                     "status": "unaffected",
                     "versionType": "custom"
                  },
                  {
                     "version": "5.16.17",
                     "lessThanOrEqual": "5.16.*",
                     "status": "unaffected",
                     "versionType": "custom"
                  },
                  {
                     "version": "5.17",
                     "lessThanOrEqual": "*",
                     "status": "unaffected",
                     "versionType": "original_commit_for_fix"
                  }
               ]
            }
         ],
         "references": [
            {
               "url": "https://git.kernel.org/stable/c/a8e32bbb96c25b7ab29b1894dcd45e0b3b08fd9d"
            },
            {
               "url": "https://git.kernel.org/stable/c/184f7bd08ce56f003530fc19f160d54e75bf5c9d"
            },
            {
               "url": "https://git.kernel.org/stable/c/0f9b7b8df17525e464294c916acc8194ce38446b"
            },
            {
               "url": "https://git.kernel.org/stable/c/ab9337c7cb6f875b6286440b1adfbeeef2b2b2bd"
            },
            {
               "url": "https://git.kernel.org/stable/c/485995cbc98a4f77cfd4f8ed4dd7ff8ab262964d"
            },
            {
               "url": "https://git.kernel.org/stable/c/a680b1832ced3b5fa7c93484248fd221ea0d614b"
            }
         ],
         "title": "crypto: qcom-rng - ensure buffer for generate is completely filled",
         "x_generator": {
            "engine": "bippy-a5840b7849dd"
         }
      }
   },
   "cveMetadata": {
      "assignerOrgId": "f4215fc3-5b6b-47ff-a258-f7189bd81038",
      "cveID": "CVE-2022-48629",
      "requesterUserId": "gregkh@kernel.org",
      "serial": "1",
      "state": "PUBLISHED"
   },
   "dataType": "CVE_RECORD",
   "dataVersion": "5.0"
}
