From: Jeroen Nieuwenbroek (puch@zeelandnet.nl)
Date: Fri Oct 05 2001 - 09:49:15 CEST
i have a rather stupid question
in my previous version of mulinux (v10) i could fill in my network adress
and my my broadcastadress. with setup -f eth0
in release 12, there is no possiblility left.
If i change the settings manualy the computer tells me thatb the network is
unreachable.
i have tried to edit /setup/cnf/eth.cnf and added the extra lines, wich
worked properly with setup -f eth0, but after running my networkadress was
again 62.238.0.0 while it must be 62.238.64.0. idem the broadcast adress:
it is now 62.238.255.255 while it must be 62.238.95.255
also tried with ifconfig netmask ..... eth0 was half sucsessfull,
what is the correct order for manual editing ? is it possible to change the
settings in rc.local if nothing else works ?
first :ipsettings
second :route
third :standard gateway ?
this is my ip and working fine under MUv10 ip 62.238.95.192 subnetmask
255.255.224.0 networkadress 62.238.64.0 and broadcastadress 62.238.95.255
my standard gateway is 62.238.95.254
can anyone tell me what i'm doing wrong ?
another great fan of MULINUX !
Jörp Nieuwenbroek
The netherlands...
View my backgarden: http://62.238.95.192:81 !
----- Original Message -----
From: "Michele Andreoli" <m.andreoli@tin.it>
To: <mulinux@sunsite.dk>
Sent: Thursday, October 04, 2001 5:46 PM
Subject: Re: mulinux & AMD CPU
> On Fri, Oct 05, 2001 at 12:34:15AM +1000, Charles Littlefield nicely
wrote:
> > Hello,
> >
> > I recently installed mulinux (V11r12) on a 486SX-33MHz machine with 8MB
RAM
> > and it worked but seemed to be running slowly. E.G. "PS" only lists
> > processes at the rate of about one per second. I assume this is due to
the
> > relatively slow CPU.
>
> "ps" is a simple script. You will find a good ps in an addon.
>
>
> >
> > A few days ago, a workmate gave me an AM486DE2-66V8TGC CPU. I thought
this
> > would be a way of increasing the speed of my machine and in fact it does
run
> > faster. All programs/OS's on the machine work, including MINIX 2.0.0
but
> > not mulinux. What happens is after "uncompressing linux..." appears the
> > machine reboots. I can replace the CPU with the original and everything
> > works as mentioned above. If I reduce the AMD CPU speed to 25MHz (50MHz
> > internal) mulinux runs but as soon as I put it back to 33MHz (66Mhz
> > internal) the problem reoccurrs.
> >
>
> I cannot help.
>
> Michele
>
> --
> I keep trying to locate a meeting of Quantum Physicists. But everytime
> they set a meeting time, the location changes. And vice versa -- Anonymous
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
> For additional commands, e-mail: mulinux-help@sunsite.dk
>
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
For additional commands, e-mail: mulinux-help@sunsite.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:20 CET