From: nelson (nanet) (ngcnet@nanet.com.br)
Date: Fri Mar 16 2001 - 01:56:01 CET
Dear Jochen if with get it work please send a e-mail to me.
My e-mail is ngcnet@nanet.com.br
Eng. Nelson Gonçalves Corrêa Jr.
----- Original Message -----
From: Jochen Cichon <joschi@vizzavi.net>
To: <mulinux@sunsite.dk>
Sent: Wednesday, March 14, 2001 6:01 AM
Subject: Re: Problems with gateway/router
>
> > How do you configure like a router ?
> > I'm try to do this some time ago without success.
> > Could you help me ??
>
> As a first step I setup as a gateway.
> So I have 2 Ethernet Cards and 3 Serial Ports.
>
> So
> Eth0 is 192.168.1.1
> Eth1 is 192.168.10.1
> and
> ttyS0 is a PPP connection to a local machine
> also ttyS2 so I can only use one of them :( at the same time.
> and ttyS1 is the ppp connection to an isp.
>
> So setup masquerading, and that should (!) work as a first step.
> After that you can add some rules, like
> everyone comming from 192.168.10.1 can ONLY do http on port 80 everything
> else is blocked
> or nothing from 192.168.10.1 will be go to 192.168.1.1.... or else
> setup ipfwadm (i think :) here I have no running mu for testing...)
>
>
>
> Ciao Jochen...
>
> PS: BUT I've be glad if the gateway works FINE. Cos of the reported
problem.
> So I'll try to setup NOTHING only eth0 and ppp to isp and hope that
will
> work..
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
> For additional commands, e-mail: mulinux-help@sunsite.dk
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
For additional commands, e-mail: mulinux-help@sunsite.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:18 CET