From: Vesa-Pekka Palmu (vessu@dlc.fi)
Date: Mon Mar 12 2001 - 19:27:16 CET
> Although kinda' redundant did you set the cabling to use cat5(RJ45) cables???
> A few of my 3c509b's were set in this manner and I had to use the DOS setup program to switch them to use thin coax.......as they were talking to an empty plug*grin*
>
> winsor
Each card has been configured to use the RJ45, as it is the
network type I use, but could the ip be the problem, as my network
uses IPs of 150.0.0.XXX so that the packets are routed to how
knows where???
All I can say is that when I issue a cat /porc/net/dev I see eth0 up,
and havin many "packet transmit errors" (that little colum where it
shows how much packets couldnät be transmitted.
on other parts the network works fine, only thing is that I can't get
that docked thinkpad to talk to the other machines on the net, or
any other machine to talk to the thinkpad....
Registered Linux user number 189403
Registered Linux machines 83873 & 83874
"We are the Windows. Your life as you knew it is over. Your biological and
technological identities will be removed from our own. stability is irrelevant.
Resistance is futile. You will be assimilated."
Vesa-Pekka Palmu AKA Depili
E-mail: depili@sci.fi
ICQ#: 12379430
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
For additional commands, e-mail: mulinux-help@sunsite.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:18 CET