From: Alfred Breull (puma@hannover.sgh-net.de)
Date: Fri Feb 09 2001 - 17:22:46 CET
Hi:
Strange -- mulinux 11r8 didn't install to my hd in fat16 (msdos/ winnt).
boot.bat broke of with
................ can't open image file for initrd
Also, file makefd is missing.
Anyone ?
For details on my box, dmesg from Tom's linux (version 1.7.185) is
included below.
Alf
-------- dmesg (tomsrtb 1.7.185) ----------
Memory: sized by int13 0e801h
Console: 16 point font, 400 scans
Console:
colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service
Directory structure at 0x000fafd0
pcibios_init : BIOS32 Service Directory
entry at 0xfb440
pcibios_init : PCI BIOS revision 2.10 entry at
0xfb470
Probing PCI hardware.
Calibrating delay loop.. ok - 730.73
BogoMIPS
Memory: 256956k/262144k available (816k kernel code, 384k
reserved, 3988k data)
Swansea University Computer Society NET3.035 for
Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea
University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP,
TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error
reporting.
Checking 'hlt' instruction... Ok.
Pentium-III serial number
disabled.
Linux version 2.0.37 (root@6M) (gcc version 2.7.2.3) #13 Fri Oct
15 19:41:45 EDT 1999
Starting kswapd v 1.4.2.2
Serial driver version
4.13p1 with no serial options enabled
ttyS01 at 0x02f8 (irq = 3) is a
16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
Ramdisk driver initialized :
16 ramdisks of 4096K size
loop: registered device at major 7
hdd: IOMEGA
ZIP 100 ATAPI Floppy, ATAPI FLOPPY drive
ide2: ports already in use,
skipping probe
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is
1.44M
FDC 0 is a post-1991 82077
scsi : 0 hosts.
scsi : detected
total.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
max=256).
3c59x.c:v0.99H 11/17/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
hdd: 98304kB,
96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
hdd: no media in the
drive
Partition check:
VFS: Disk change detected on device 02:3c
RAMDISK:
Compressed image found at block 518
VFS: Mounted root (minix
filesystem).
MINIX-fs: mounting unchecked file system, running fsck is
recommended.
scsi : 0 hosts.
scsi : 0 hosts.
scsi : 0 hosts.
(scsi0)
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 10/0
(scsi0)
Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Downloading sequencer code...
407 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.13/3.2.4
<Adaptec AIC-7892 Ultra 160/m
SCSI host adapter>
scsi : 1 host.
Vendor: QUANTUM Model: ATLAS_V__9_WLS
Rev: 0230
Type: Direct-Access ANSI SCSI
revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: TOSHIBA Model: CD-ROM XM-6401TA Rev: 1001
Type: CD-ROM
ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at
scsi0, channel 0, id 2, lun 0
(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec,
offset 63.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17930694 [8755
MB] [8.8 GB]
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
EATA0: address 0xd810
in use, skipping probe.
EATA0: address 0x170 in use, skipping probe.
scsi :
1 host.
scsi : 1 host.
scsi : 1 host.
ppa: Version 1.42
ppa: Probing port
03bc
ppa: Probing port 0378
ppa: SPP port present
ppa: PS/2
bidirectional port present
ppa: Probing port 0278
scsi : 1 host.
scsi : 1
host.
scsi : 1 host.
ide-floppy: hdd: I/O error, pc = 0, key = 2, asc =
3a, ascq = 0
ide-floppy: hdd: I/O error, pc = 1b, key = 2, asc = 3a, ascq
= 0
hdd: no media in the drive
-------------- end of file
--------------------------------
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
For additional commands, e-mail: mulinux-help@sunsite.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:18 CET