From: isaia (lucisai@tin.it)
Date: Sat Nov 25 2000 - 23:12:57 CET
-----Messaggio originale-----
Da: Michele Andreoli <m.andreoli@tin.it>
A: mulinux@sunsite.auc.dk <mulinux@sunsite.auc.dk>
Data: giovedì 23 novembre 2000 17.59
Oggetto: Re: Problem with X server
>On Wed, Nov 22, 2000 at 11:52:06PM +0100, isaia nicely wrote:
>> I configure the mouse and the X server.
>> But when I run the X server with startx the sceen appear blue and the
mouse
>> corsor not appear.
>> I press control alt backspace for exit and I read the xWindow log on the
>> finals line:
>> Fvwm-95: in funtion popup_func: <<ERROR>> No such menu applications
>> xinit: connetion to X server lost
>>
>> waiting for X server to shut down.
>
>It's strange, that: please, try with another window manager:
>
> # startx afterstep
> # startx wm2
>
>Michele
>
>--
>In summing up, I wish I had some kind of affirmative message to leave
>you with, I don't. Would you take two negative messages? - Woody Allen
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk
>For additional commands, e-mail: mulinux-help@sunsite.auc.dk
>
Thanks for the suggestion.
But also so I don't get anything. I have tried with afterstep but after a
first screen grey, where I should find a cross that points out the mouse, I
get one screen blue and a green but not vieve visualized nothing. I say this
because I have installed the mulinux on an old 386,8MB of RAM, serial mouse:
here Xwindow runs, and the mouse is seen on screen grey.
After having pressed control-halt-backspace I have read the lines of log
that it results to be this:
**********************************************************************
XFree86 Version 3.1.2 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
VGA16: server for 4-bit colour VGA (Patchlevel 0):
et4000, et4000w32, et4000w32i, et4000w32p, ncr77c22, ncr77c22e,
vgawonder, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga9000,
oti067, oti077, oti087, cl6410, cl6412, cl6420, cl6440, generic
MONO: server for interlaced and banked monochrome graphics adaptors
(Patchlevel 0):
hgc1280, sigmalview, apollo9, hercules
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200
(**) VGA16: Graphics device ID: "Generic VGA"
(**) VGA16: Monitor ID: "SVGA"
(--) VGA16: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 35.52 kHz. Deleted.
(--) VGA16: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) VGA16: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) VGA16: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) VGA16: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) VGA16: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) VGA16: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) VGA16: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/misc/"
(**) VGA16: chipset: generic
(--) VGA16: videoram: 256k (using 256k)
(**) VGA16: clocks: 25.20 28.30
(--) VGA16: Maximum allowed dot-clock: 90.000 MHz
(**) VGA16: Mode "640x480": mode clock = 25.175, clock used = 25.200
(--) VGA16: There is no mode definition named "800x600"
(--) VGA16: Removing mode "800x600" from list of valid modes.
(**) VGA16: Virtual resolution set to 640x480
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
xinit: connection to X server lost.
waiting for X server to shut down.
*********************************************************************
Idem for wm2.
I don't succeed in understanding if it is due to the configuration.
The mouse works well and it is recognized in how much if I launch the demon
gpm it is seen
the cursor of the mouse to move.The configuration of Xwindows is the
following:
**********************************************************************
# **********************************************************************
# XF86CONFIG for muLinux XWINDOW, by M.Andreoli
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
EndSection
Section "ServerFlags"
# NoTrapSignals
# DontZap
# DontZoom
EndSection
Section "Keyboard"
Protocol "Standard"
AutoRepeat 500 5
# ServerNumLock
# Xleds 1 2 3
LeftAlt Meta
RightAlt ModeShift
ScrollLock ModeLock
RightCtl Compose
EndSection
Section "Pointer"
Protocol "MOUSE_PROTOCOL"
Device "/dev/mouse"
EMULATE3BUTTONS
Protocol "PS/2"
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons
# Emulate3Timeout 50
# ChordMiddle
EndSection
Section "Monitor"
Identifier "SVGA"
VendorName "COMPAQ"
ModelName "472P"
HorizSync 31.5
VertRefresh 50-70
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817
Interlace
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync
+vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync
+vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777
806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777
806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165
Interlace
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225
Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262
Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262
Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 602 312
Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314
Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333
Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312
Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333
Doublescan
EndSection
# July 2000: added SVGA support (thanks to Dave Houghton)
#---------------------------
# Standard SVGA Device:
#---------------------------
Section "Device"
Identifier "Generic SVGA"
VendorName "COMPAQ"
BoardName "Unknown"
Videoram 1024
EndSection
Section "Screen"
Driver "svga"
Device "Generic SVGA"
Monitor "SVGA"
Subsection "Display"
# Depth 16
Modes "800x600" "640x480"
EndSubsection
EndSection
#-----------------------------
# Standard VGA Device:
#-----------------------------
Section "Device"
Identifier "Generic VGA"
VendorName "COMPAQ"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
Clocks 25.2 28.3
EndSection
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "SVGA"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
Virtual 640 480
EndSubsection
EndSection
**********************************************************************
Thanks for the help and the attention.
Isaia Luciano.
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk
For additional commands, e-mail: mulinux-help@sunsite.auc.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:16 CET