Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips64_octeonplus.ipk
Size: 25634
SHA256sum: 1cab7acabe9a6546aa54acfe71a6a4ea2f950385dc9c5a1a8534501e78876680
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 153600
Filename: alfred_2024.3-r1_mips64_octeonplus.ipk
Size: 29468
SHA256sum: 19861f6a2ed261163107fd5468a3e87221fe6760ba9210d1627eb904d7369efc
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips64_octeonplus.ipk
Size: 4989
SHA256sum: 9daae5e0d7c4f2b11ab46c891e9c4a76b620b8c3731c4e9cf8f0543d8e8b6186
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips64_octeonplus
Installed-Size: 225280
Filename: babeld_1.13.1-r2_mips64_octeonplus.ipk
Size: 74048
SHA256sum: 9589bd46ff0e12ab922f9f7bce315242a41821bba9f104e8cad31fd0ee45473a
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mips64_octeonplus.ipk
Size: 45649
SHA256sum: 268db0195686a1a2de7d902a638e7c979c5855b027284b94f03b76e77106bfe6
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mips64_octeonplus.ipk
Size: 52739
SHA256sum: e2d3a0d6268ffdd33032d9c6be5348b3f9c945f9ad39cd32e2154f18860e77ad
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mips64_octeonplus.ipk
Size: 15859
SHA256sum: c3639f9e4980eb95b23d40b9bd850f7c42aab4fb8b430bd7979fa646e4064d82
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: batmand_1440-r1_mips64_octeonplus.ipk
Size: 43921
SHA256sum: f6090fba4106c2fea4bfb74872d5e3563a2ab3358c8aaa09a05829b7b7135349
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 1218560
Filename: bird2_2.15.1-r1_mips64_octeonplus.ipk
Size: 412745
SHA256sum: a1ddbd96d7b05ac757bb253435d19a62ba48813aaf4c77eab470c14de654858f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2c_2.15.1-r1_mips64_octeonplus.ipk
Size: 11078
SHA256sum: 6f56ce8ceb799a0e6286bae0a3d0ad8f2bda08eaf14bb8b59596d1ec41d21589
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bird2cl_2.15.1-r1_mips64_octeonplus.ipk
Size: 9655
SHA256sum: 96272cb1b3007504d74ae0f190834e0f6199d6419c2c5a284001cca06f95370a
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mips64_octeonplus.ipk
Size: 4691
SHA256sum: b89073a83d53806a11d560275ac8960f67e95d60b852a53a7f5aaaf15fddd775
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mips64_octeonplus.ipk
Size: 8416
SHA256sum: 7199c4bf402377b5f36f90e0b62a1aeea6d1b9aea7d9dc53a061ad795c8b3871
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mips64_octeonplus.ipk
Size: 6221
SHA256sum: 3eb2bf87e0c44006157c1a5efd15f2d109356849e3be1c17695cd823db1f52da
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-table_r2024061001-r1_mips64_octeonplus.ipk
Size: 10194
SHA256sum: d4e12d5cedd3f7019f10de0d31b0c58fc3e18cb65e29ca37572918ad7a1843fc
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mips64_octeonplus.ipk
Size: 5624
SHA256sum: 0ea8c7591e0bc29e5a9e41b31e703d8007bc051250955a3872905d90d0fdb5dd
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mips64_octeonplus.ipk
Size: 25673
SHA256sum: 04a484202158cc2dea62fd29dd929bad357deb0f378657a89d5c01ae30147619
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mips64_octeonplus.ipk
Size: 8940
SHA256sum: 648e94d88522972a520824ed2408e37636f525606d4abacd25ca9f56249ec24c
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips64_octeonplus
Installed-Size: 440320
Filename: bmx7_r2024061001-r1_mips64_octeonplus.ipk
Size: 165033
SHA256sum: 8d8c2cceec293ff4c48b8601912ce2b3462905f0e45b304cf896ca25301d12fd
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 839680
Filename: cjdns-tests_21.1-r6_mips64_octeonplus.ipk
Size: 328033
SHA256sum: f124640d3acdd370d877d755514779527e69ca27ddfc63b78294b087bce66d21
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 1003520
Filename: cjdns_21.1-r6_mips64_octeonplus.ipk
Size: 384456
SHA256sum: d3f1f8c43eb08ec498d6558d77d8d857443e49de97c2cc49b2bbc03f2d70f822
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 1426
SHA256sum: 23f6fd56d7f509bfa80a7034654bed769c1eb2c0b9a6042df5d93cd283842b55
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 959
SHA256sum: e414af3ca76688cdebc826edeee91edb0462892af73a81f920ca05656fdaca75
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 945
SHA256sum: 4d855c09a2c858f19f2fcf2cf82f0cfff6eb7e33d5b221482973c9b96302d0bb
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 108075
SHA256sum: c9634134059494a7bb423fa85edea97b73b5d8f30149cdc49c34664806932f91
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips64_octeonplus
Installed-Size: 307200
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 119473
SHA256sum: bcb4d50574d31b30159ed2e509bb5d68918668be4df0bc45c9ba61c06e03c63d
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips64_octeonplus
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips64_octeonplus.ipk
Size: 6589
SHA256sum: 35863a12c3018bc93bd0cdb8c071fee16facf4b5f1e64063c4ad907a0a5abf73
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips64_octeonplus.ipk
Size: 57622
SHA256sum: 77be072217f8e469ce4c23470420ce6ca875c2164df504fb19a774ea1d2e699b
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7783
SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips64_octeonplus.ipk
Size: 8324
SHA256sum: 1e99abc6cdfe2414ee88d372cf2bb5515c269611e266eae3c7e71172231e524d
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2852
SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips64_octeonplus.ipk
Size: 41371
SHA256sum: e48bffbc1dfc76faecc7a6f93351c47aacaa14a86da41833b7086c18f3825f0f
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips64_octeonplus
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips64_octeonplus.ipk
Size: 50579
SHA256sum: c79ef72c03de607546d2b1b6da1b62d94c4ca6509f090d9b23b8b80490f6ca28
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 13065
SHA256sum: f25082520daaf58b4fc5d6cec7cfd6c98d8ee933cc13bd47704fd47ac44c359f
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 2801
SHA256sum: c53681583de022786e8c1d4724b786a86996217e6e138db9a550985cc54d1151
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 12748
SHA256sum: ed23f008abb59913e20ad27e0d1bd0f97047551fbf16dacb2ee93ec8a0afec95
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 4504
SHA256sum: 7df083183b72d4f3a325a77475a6609e3ee0124a045ff049be4c473b566b2c5b
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3123
SHA256sum: a73811bae1b4b5ab3a7f861940b52fa81eca69cdc6c96f8b3e424f0bb2efd9dc
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 4945
SHA256sum: 222855b762bb53c2c23964c4684d6617d44cbaea36c4e3a070616de4891ba22a
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3374
SHA256sum: 87dd82e3e9bf89eda15e5127cd1962b2c5ad5cd8825d8e3a742e6b9a180f0892
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 31178
SHA256sum: 43ea25b53c10a935989c2378ff307a67ac055bc2ac0b695f28d3f423d86de8f8
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 21621
SHA256sum: 3c618771a58b7a69e31d7c8c67dcaf9fcb8b0cb28e56805d3af71af58931eb7c
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 9537
SHA256sum: e72f35a90d9280546e02f3d9db54df6a8f65d70d2308e33c6d200c449dfca259
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 11733
SHA256sum: b6f22ceccb9a8ad7c0a33d5f99fcc8d9d52f44bacf84efd0d711454593497653
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 13253
SHA256sum: bff3040d884c9fff16eddbe14f95b95759297796a50abd24bc25acae6bdcc910
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 9227
SHA256sum: cde0cef465995e5e86334a5f09e10d77056c4594df255e330a70d254ccf78fb8
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 3662
SHA256sum: 706b1f0633de8e9c899007db3b68e4a5c7e8dedaf9ab78bc0b0890c900ba0dd4
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 57599
SHA256sum: ebb6e09d441cc45dabc0a2c480261c5ee33b59d336383c49aee88b065868e504
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 6993
SHA256sum: 5cce5a85207f2883299793a7d890aeb1595ca43b2c1ebf7e76119713ebd3377c
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 10948
SHA256sum: 64853393f0ae38b063579fc146cf0d0e51ddc35dcf3a53e7831ac65b88779d4f
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 5205
SHA256sum: d775ce5bd5de517e8dfcd05d4ad260a4112259e3e7cd9351286397da48b9d8ca
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 15141
SHA256sum: 5123f3d796e7caaf6f0e074cb62d20b1783dac7ccb94f89e4503ea630433728e
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 2457
SHA256sum: 4621c2947b3ce71acb77a976a25486ed4cb6f81daf336a8844627d0c81d13a9a
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 1952
SHA256sum: 911475382709d7159548f7377cc76710f1b8d19a191e4b4168a69c8080692d78
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 378880
Filename: olsrd_2024.06.09~d72be9ad-r1_mips64_octeonplus.ipk
Size: 134182
SHA256sum: f8d29e01a4f784175f182b50b694944a66ddc9c4324f80f21dbbe804cdc479ef
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 168893
SHA256sum: 04fa89a118a1f8f2a7442ba58d3381bb5e0b47d3d06c2c6d498dd0fc7bac1a91
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 512000
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips64_octeonplus.ipk
Size: 164429
SHA256sum: 706481c8d42788fd308dbb60d0841303f3b5252b87be5433671eab7d2ab74d94
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips64_octeonplus.ipk
Size: 2302
SHA256sum: 37fe03491442c0a25292610dec761d0cb947457f2ab52f09fc2e8df2a7fe5ef1
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips64_octeonplus
Installed-Size: 727040
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips64_octeonplus.ipk
Size: 244518
SHA256sum: cf7a0bd72d547768ecdf7a296eac289f9b36c89ed22145cd51c207e9b8d8b231
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips64_octeonplus
Installed-Size: 706560
Filename: opennds_10.3.0-r1_mips64_octeonplus.ipk
Size: 163731
SHA256sum: e24a2d9dcd5887f92b0391ee10b8ee4c8e718f8e1843763ef33f3396b70545d2
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips64_octeonplus
Installed-Size: 286720
Filename: pimbd_2018.06.19~dbf4e591-r4_mips64_octeonplus.ipk
Size: 88554
SHA256sum: 4f1da07c2af7059df38a87fa84def2889017cecee16431d667b994a7ad891436
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips64_octeonplus
Installed-Size: 215040
Filename: prince_0.4-r3_mips64_octeonplus.ipk
Size: 34999
SHA256sum: f343eb5a45523d8af2c54ecaa58cd3d7a350af488a781a14406e3fa559e1db40
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips64_octeonplus
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips64_octeonplus.ipk
Size: 12793
SHA256sum: 5aca6063ac335a92851aa2f795c08edd9667f761700a0ce48fd40052b38a4c62
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips64_octeonplus
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips64_octeonplus.ipk
Size: 10759
SHA256sum: 7d44b3da3b75a5d6dac478f654b0236e753938d4206f28f84cd4204d2a2fe61c
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.