NAME
    Linux::Smaps - a Perl interface to /proc/PID/smaps

SYNOPSIS
      use Linux::Smaps;
      my $map=Linux::Smaps->new($pid);
      my @vmas=$map->vmas;
      my $private_dirty=$map->private_dirty;
      ...

INSTALLATION
     perl Makefile.PL
     make
     make test
     make install

DESCRIPTION
    The /proc/PID/smaps files in modern linuxes provides very detailed
    information about a processes memory consumption. It particularly
    includes a way to estimate the effect of copy-on-write. This module
    implements a Perl interface.

    The content of the smaps file is a set of blocks like this:

     0060a000-0060b000 r--p 0000a000 fd:01 531212       /bin/cat
     Size:                  4 kB
     Rss:                   4 kB
     Pss:                   4 kB
     Shared_Clean:          0 kB
     Shared_Dirty:          0 kB
     Private_Clean:         0 kB
     Private_Dirty:         4 kB
     Referenced:            4 kB
     Swap:                  0 kB
     KernelPageSize:        4 kB
     MMUPageSize:           4 kB

    Each one describes a virtual memory area of a certain process. All those
    areas together describe its complete address space. For the meaning of
    the items refer to your Linux documentation.

    The set of information announced by the kernel depends on its version.
    Early versions (around Linux 2.6.14) lacked for example "Pss",
    "Referenced", "Swap", "KernelPageSize" and "MMUPageSize". "Linux::Smaps"
    provides an interface to all of the components. It creates accessor
    methods dynamically depending on what the kernel reveals. The
    "Shared_Clean" entry for example mutates to the
    "Linux::Smaps::VMA->shared_clean" accessor. Method names are built by
    simply lowercasing them. The actual set of methods is created when the
    first smaps file is parsed. Subsequent "update" or "Linux::Smaps->new"
    operations expect exactly the same file format. That means you cannot
    parse smaps files from different kernel versions by the same perl
    interpreter.

  Constructor, Object Initialization, etc.
   Linux::Smaps->new
   Linux::Smaps->new($pid)
   Linux::Smaps->new(pid=>$pid, procdir=>'/proc')
   Linux::Smaps->new(filename=>'/proc/self/smaps')
    creates and initializes a "Linux::Smaps" object. On error an exception
    is thrown. "new()" may fail if the smaps file is not readable or if the
    file format is wrong.

    "new()" without parameter is equivalent to "new('self')" or
    "new(pid=>'self')". With the "procdir" parameter the mount point of the
    proc filesystem can be set if it differs from the standard "/proc".

    The "filename" parameter sets the name of the smaps file directly. This
    way also files outside the standard "/proc" tree can be analyzed.

   Linux::Smaps->new(uninitialized=>1)
    returns an uninitialized object. This makes "new()" simply skip the
    "update()" call after setting all parameters. Additional parameters like
    "pid", "procdir" or "filename" can be passed.

   $self->pid($pid) or $self->pid=$pid
   $self->procdir($dir) or $self->procdir=$dir
   $self->filename($name) or $self->filename=$name
    get/set parameters.

    If a filename is set "update()" reads that file. Otherwize a file name
    is constructed from "$self->procdir", "$self->pid" and the name "smaps".
    The constructed file name is not saved in the "Linux::Smaps" object to
    allow loops like this:

     foreach (@pids) {
         $smaps->pid=$_;
         $smaps->update;
         process $smaps;
     }

   $self->update
    reinitializes the object; rereads the underlying file. Returns the
    object or "undef" on error. The actual reason can be obtained via
    "lasterror()".

   $self->clear_refs
    writes to the corresponding /proc/PID/clear_refs file. Thus, the amount
    of memory reported as "Referenced" by the process is reset to 0 for all
    VMAs.

    Returns the object or "undef" on failure.

    Example:

     # how much memory is referenced while updating the Linux::Smaps object?
     perl -MLinux::Smaps -le '
       my $s=Linux::Smaps->new;
       print $s->referenced;
       print $s->clear_refs->update->referenced
     '
     2556
     840

     # how much memory is used while the shell is inactive?
     perl -MLinux::Smaps -le '
       my $s=Linux::Smaps->new(shift);
       print $s->referenced;
       print $s->clear_refs->update->referenced
     ' $$
     1468
     0

   $self->lasterror
    "update()" and "new()" return "undef" on failure. "lasterror()" returns
    a more verbose reason. Also $! can be checked.

  Information Retrieval
   $self->vmas
    returns a list of "Linux::Smaps::VMA" objects each describing a vm area,
    see below.

   $self->size
   $self->rss
   $self->shared_clean
   $self->shared_dirty
   $self->private_clean
   $self->private_dirty
    these methods compute the sums of the corresponding values of all vmas.

    "size", "rss", "shared_clean", "shared_dirty", "private_clean" and
    "private_dirty" methods are unknown until the first call to
    "Linux::Smaps::update()". They are created on the fly. This is to make
    the module extendable as new features are added to the smaps file by the
    kernel. As long as the corresponding smaps file lines match
    "^(\w+):\s*(\d+) kB$" new accessor methods are created.

    At the time of this writing at least one new field ("referenced") is on
    the way but all my kernels still lack it.

   $self->stack
   $self->heap
   $self->vdso
   $self->vsyscall
    these are shortcuts to the corresponding "Linux::Smaps::VMA" objects.

   $self->all
   $self->named
   $self->unnamed
    In array context these functions return a list of "Linux::Smaps::VMA"
    objects representing named or unnamed VMAs or simply all VMAs. Thus, in
    array context "all()" is equivalent to "vmas()".

    In scalar context these functions create a fake "Linux::Smaps::VMA"
    object containing the summaries of the "size", "rss", "shared_clean",
    "shared_dirty", "private_clean" and "private_dirty" fields.

   $self->names
    returns a list of vma names, i.e. the files that are mapped.

   ($new, $diff, $old)=$self->diff( $other )
    $other is assumed to be also a "Linux::Smaps" instance. 3 arrays are
    returned. The first one ($new) is a list of vmas that are contained in
    $self but not in $other. The second one ($diff) contains a list of pairs
    (2-element arrays) of vmas that differ between $self and $other. The 3rd
    one ($old) is a list of vmas that are contained in $other but not in
    $self.

    Vmas are identified as corresponding if their "vma_start" fields match.
    They are considered different if they differ in one of the following
    fields: "vma_end", "r", "w", "x", "mayshare", "file_off", "dev_major",
    "dev_minor", "inode", "file_name", "shared_clean", "shared_diry",
    "private_clean" and "private_dirty".

  "Linux::Smaps::VMA" objects
    normally these objects represent a single vm area:

   $self->vma_start
   $self->vma_end
    start and end address

   $self->r
   $self->w
   $self->x
   $self->mayshare
    these correspond to the VM_READ, VM_WRITE, VM_EXEC and VM_MAYSHARE
    flags. see Linux kernel for more information.

   $self->file_off
   $self->dev_major
   $self->dev_minor
   $self->inode
   $self->file_name
    describe the file area that is mapped.

   $self->size
    the same as vma_end - vma_start but in kB.

   $self->rss
    what part is resident.

   $self->shared_clean
   $self->shared_dirty
   $self->private_clean
   $self->private_dirty
    "shared" means "page_count(page)>=2" (see Linux kernel), i.e. the page
    is shared between several processes. "private" pages belong only to one
    process.

    "dirty" pages are written to in RAM but not to the corresponding file.

  Notes
    "size", "rss", "shared_clean", "shared_dirty", "private_clean" and
    "private_dirty" methods are unknown until the first call to
    "Linux::Smaps::update". They are created on the fly. This is to make the
    module extendable as new features are added to the smaps file by the
    kernel. As long as the corresponding smaps file lines match
    "^(\w+):\s*(\d+) kB$" new accessor methods are created.

    See also "EXPORT" below.

Example: The copy-on-write effect
     use strict;
     use Linux::Smaps;

     my $x="a"x(1024*1024);         # a long string of "a"
     if( fork ) {
       my $s=Linux::Smaps->new($$);
       my $before=$s->all;
       $x=~tr/a/b/;                 # change "a" to "b" in place
       #$x="b"x(1024*1024);         # assignment
       $s->update;
       my $after=$s->all;
       foreach my $n (qw{rss size shared_clean shared_dirty
                         private_clean private_dirty}) {
         print "$n: ",$before->$n," => ",$after->$n,": ",
                $after->$n-$before->$n,"\n";
       }
       wait;
     } else {
       sleep 1;
     }

    This script may give the following output:

     rss: 4160 => 4252: 92
     size: 6916 => 7048: 132
     shared_clean: 1580 => 1596: 16
     shared_dirty: 2412 => 1312: -1100
     private_clean: 0 => 0: 0
     private_dirty: 168 => 1344: 1176

    $x is changed in place. Hence, the overall process size (size and rss)
    would not grow much. But before the "tr" operation $x was shared by
    copy-on-write between the 2 processes. Hence, we see a loss of
    "shared_dirty" (only a little more than our 1024 kB string) and almost
    the same growth of "private_dirty".

    Exchanging the "tr"-operation to an assingment of a MB of "b" yields the
    following figures:

     rss: 4160 => 5276: 1116
     size: 6916 => 8076: 1160
     shared_clean: 1580 => 1592: 12
     shared_dirty: 2432 => 1304: -1128
     private_clean: 0 => 0: 0
     private_dirty: 148 => 2380: 2232

    Now we see the overall process size grows a little more than a MB.
    "shared_dirty" drops almost a MB and "private_dirty" adds almost 2 MB.
    That means perl first constructs a 1 MB string of "b". This adds 1 MB to
    "size", "rss" and "private_dirty" and then copies it to $x. This takes
    another MB from "shared_dirty" and adds it to "private_dirty".

A special note on copy on write measurements
    The proc filesystem reports a page as shared if it belongs multiple
    processes and as private if it belongs to only one process. But there is
    an exception. If a page is currently paged out (that means it is not in
    core) all its attributes including the reference count are paged out as
    well. So the reference count cannot be read without paging in the page.
    In this case a page is neither reported as private nor as shared. It is
    only included in the process size.

    Thus, to exaclty measure which pages are shared among N processes at
    least one of them must be completely in core. This way all pages that
    can possibly be shared are in core and their reference counts are
    accessible.

    The mlockall(2) syscall may help in this situation. It locks all pages
    of a process to main memory:

     require 'syscall.ph';
     require 'sys/mmap.ph';

     0==syscall &SYS_mlockall, &MCL_CURRENT | &MCL_FUTURE or
         die "ERROR: mlockall failed: $!\n";

    This snippet in one of the processes locks it to the main memory. If all
    processes are created from the same parent it is executed best just
    before the parent starts to fork off children. The memory lock is not
    inherited by the children. So all private pages of the children are
    swappable.

EXPORT
    The module's "import()" method is implemented as follows:

     my $once;
     sub import {
       my $class=shift;
       unless( $once ) {
         $once=1;
         eval {$class->new(@_)};
       }
     }

    Thus, the first

     use Linux::Smaps;

    initializes all methods according to your current kernel.

    To avoid that use

     use Linux::Smaps ();

    If your "proc" filesystem is mounted elsewhere or if you want to
    initialize the methods according to a certain file you can achieve this
    by

     use Linux::Smaps (procdir=>'/procfs');

    or

     use Linux::Smaps (filename=>'/path');

SEE ALSO
    Linux Kernel.

AUTHOR
    Torsten Foertsch, <torsten.foertsch@gmx.net>

COPYRIGHT AND LICENSE
    Copyright (C) 2005-2011 by Torsten Foertsch

    This library is free software; you can redistribute it and/or modify it
    under the same terms as Perl itself, either Perl version 5.8.5 or, at
    your option, any later version of Perl 5 you may have available.